Wednesday 22 August 2012

G Scale Passenger Car Lighting Job


Lighting G Scale Passenger Cars by Greg Hatt

A short time ago, we decided to dress up a couple of our display cases at the shop with some LED lights. This sent me on a search for available light sources that could work on a common wall adapter.

A quick search later and I came up with 1000mm white LED strips, self adhesive back, with resistors built in-line and could run off 6-12V power source. Perfect. We ordered a few extra, and hung them on the shelf.

That day, one of our long time G Scale customers, Gary Anderson, came in the store, and he saw the new lights in our display case. He asked about the possibility of lighting up a set of 3 passenger cars he had from LGB. After some brief discussion, we came up with a plan to light up his cars. The main points of the job were as follows:
Light Strip Location

  1. Independent, switched lighting circuit for each car
  2. Run off of a common 9V battery
  3. Easy to switch batteries when they die &
  4. Keep wiring circuit hidden from plain view

So I set out to make it happen. After gathering the necessary supplies, which included toggle switches, 9V battery connectors, wire, small connectors, and of course the light strips, I started to come up with a plan to install the components.

Switch under Awning
Hidden Switch blends right in
I started by deciding on a location for the switch. I found some very small black slider switches, which would be easy to hide. I had initially planned on putting the switch under the car on the bottom of the chassis to keep it out of site. However, I ran into a couple of issues. The floor was too thick to put the small switch through, and it would be difficult to effectively hide the wiring coming from the switch. So I noticed that in the awning mould on the roof there was enough space to house the switch, and hide excess wiring. After a small amount of work with the dremel tool, I had a slot in the underside of the awning just big enough for the slider of the switch to fit through, and barely noticeable unless you know it was there.

Battery Location
Next was a place to hide the 9V battery. The original plan was to try and hide it on the floor near the back of the car. I thought that would be somewhat impractical, as I would now have to hide more wire running to the top of the car. I noticed there was a fair amount of room on the top of the roof (on the inside of course) and thought it would be the perfect location for the battery. It turned out I was right. The battery simply attaches with a piece of Velcro to the top of the roof.

All tied together
To tie everything together I soldered the battery connector negative wire to the light strip negative, but then I thought about having the roof fully removable as the original car was designed. So I simply ran 2 wires off the switch, and attached a 2 pin JST terminal commonly used in electric model aircraft, then the positive off the battery connector, and the light strip positive got the other end of the JST Terminal. Now the battery/light circuit could be disconnected from the switch for any future maintenance.

With all the wiring done, and all pieces in place, I re-assembled the car, and flipped the switch. The LED strip came on as expected, really looked the part, and the system was hidden from plain view. And the best part of all, it’s easy to remove the roof, access the battery and change when necessary.

Lights off
Lights on
This was a really fun project, and a great challenge in problem solving. Gary is pleased with the results, and now I’m finding more projects to light up.


 

Tuesday 29 May 2012

The Basics of Model Train Scales & Gauges by Jim Jones

The terms are often used interchangeably but they are different. Gauge is the distance between the rails. HO gauge means a distance of 16.5mm between the rails. HO scale refers to the size of the model compared to the real thing. HO scale is 1/87 so 1" on the model equals 87" on the prototype.

The current common commercial scales are G, O, HO & N & Z.

G scale is more often referred to as G gauge. Several scales run on the 45mm gauge track. G comes from the German "grob" meaning big. G scale is 1:22.5. Manufacturers use scales between 1:20 & 1:29.

O scale or gauge which is 1:48 in the USA or 1:43 in the UK means zero or 1 less than the old Gauge 1. Gauge 1 also runs on 45mm track whereas gauge O runs on 32mm gauge.

HO is 1/2 of O. In the US it is 1/87 scale. In the UK they use a scale of 1:76 on the same 16.5mm gauge & it is called OO scale or OO gauge.

N scale started out as OOO or 1/2 of OO. Arnold introduced electric powered trains in 1962 & their name "N" prevailed, the scale in the US & Europe is 1:160, in Japan where N scale is #1 it is 1:150 & in the UK it is 1:148. The gauge is a universal 9.0mm.

Z scale was introduced by Marklin in 1972. The letter Z was chosen because it was thought impossible to make something smaller. The scale is 1:220. The gauge is 6.5mm.

The impossible of course has happened. Eishindo of Japan introduced T scale in 2006 with a scale of 1:450 & a track gauge of only 3.0mm.

More extensive information including narrow gauge derivatives can be found by on Wikipedia.

Monday 7 May 2012

Welcome to the new online blog for Maritime Hobbies & Crafts. We are Eastern Canada's oldest independent hobby shop. We specialize in Model Trains, R/C vehicles, plastic models, diecast vehicles, kites and much more. In this spot, we will be adding tips, hints, and tricks for various modeling techniques.

So stay tuned for some exciting posts, and happy modeling!